Product Description:

The MDD025A-N-100-N2G-040PE1 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor designed for digital drive controllers, it converts commanded current into precise torque and speed to move small actuators, pick-and-place heads, or compact indexing tables within automated machinery. Its mechanical outline follows the series conventions, allowing simple pairing with compatible drives and installation in tight axis spaces common to electronic assembly and light material-handling workstations.

At a nominal speed of 10000 rpm, the rotor can sustain continuous motion without exceeding its thermal envelope, while a continuous standstill torque of 0.33 Nm indicates the force available for holding or slow-speed positioning under rated current. For emergency stops or power-off parking, the integrated blocking brake applies 1.0 Nm, so external clamps are unnecessary on light loads. Accurate shaft alignment is aided by a centering diameter of 40 mm, and service cables exit on the left side because the electrical connectors are oriented Left. The connection uses a preassembled cable with a coupling unit, which simplifies cable handling during installation. Standard dynamic balancing minimizes vibration, and the housing uses the standard design without external cooling.

Feedback to the drive is supplied by a resolver feedback package that provides position data across the full speed range and withstands high ambient noise. The motor uses size code 025 and length code A, giving a short overall body that suits narrow mechanical frames. Torque is transferred through a keyed shaft with a keyway, and the front shaft end is the only output because no side-B extension is fitted. A fitted shaft seal helps block lubricant migration and permits mounting where light coolant spray or dust is present.