MDD025A-N-100-N2G-040MA0 Bosch Rexroth Indramat
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD025A-N-100-N2G-040MA0 motor is part of the MDD Synchronous Motors series and is designed for use with digital drive controllers. It has a nominal speed of 10000 rpm, a centering diameter of 40 mm, and a continuous torque at standstill of 0.33 Nm. This motor features a standard housing with a keyway shaft type, resolver feedback, and uses a connector for side A connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD025A-N-100-N2G-040MA0 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded electrical input into precise rotary motion for compact industrial automation axes. This type of motor is commonly used on small handling units, feed axes, and other equipment that requires repeatable motion in a limited installation space. Its compact format supports responsive motion where accurate speed control and stable positioning are important.
The motor reaches a nominal speed of 10000 rpm, supporting high-cycle positioning applications with short move times. At standstill, it can sustain 0.33 Nm of continuous torque, so the drive can hold a light load without excessive heat buildup. A centering diameter of 40 mm provides an accurate locating surface for concentric installation on the machine. Power and feedback conductors exit on Side A, which can simplify cable routing in compact layouts. Position feedback is provided through resolver feedback, which gives stable rotor angle signals with good noise immunity. Standard rotor balancing and a standard enclosure are used for normal industrial service.
Within the product range, this motor uses size code 025 and length code A, indicating a very compact frame. The motor is supplied without a blocking brake, so any holding function must come from the drive or an external device when the axis is stopped. It is also built without a shaft seal, which makes it better suited to clean, dry operating areas. Electrical connection is made through a circular connector, and the motor uses a single-ended keyway shaft to transmit torque to a pulley or coupling. The layout keeps the output on one primary shaft end and suits installations that do not require a rear shaft extension.