MDD025A-N-100-N2G-040GF1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
36 Seconds
The Bosch Rexroth Indramat MDD025A-N-100-N2G-040GF1 is a motor designed for digital drive controllers and is part of the MDD Synchronous Motors series. It has a nominal speed of 10000 rpm, standard housing and balancing, and utilizes resolver feedback for motor monitoring. The motor includes a blocking brake with a holding brake torque of 1.0 Nm and features a plain shaft with a 40 mm centering diameter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD025A-N-100-N2G-040GF1 is a synchronous servo unit manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It occupies the compact 025 frame size and length code A, so it fits easily into restricted machine envelopes. Designed to pair with digital drive controllers, the motor converts controlled current into precise rotary motion for indexing tables, light actuators, and other automation axes that demand high-speed positioning. Its compact format makes it suitable for small machine sections where mounting space is limited and quick axis response is important.
With a nominal speed of 10000 rpm, the rotor can sustain rapid start-stop cycles without losing synchronism. At standstill, the electromagnetic system delivers 0.33 Nm of continuous torque, allowing the axis to support tooling weight while generating minimal heat. An integrated blocking brake rated at 1.0 Nm clamps the shaft when the controller removes power, preventing drift on vertically oriented loads. Rotor balancing is standard to help reduce bearing wear, and the centering pilot of 40 mm simplifies coaxial alignment with gearheads or belt pulleys. The sealed output end uses a plain shaft, and the motor omits a side-B shaft end, directing all torque through the drive face only. A factory-installed shaft seal helps stop oil ingress toward the resolver cavity, and a standard cast housing encloses the stator for even heat dissipation.
All electrical terminations emerge on the right, which supports straight cable runs in narrow cabinets and tight machine layouts. Main power is carried through a connecting cable with a coupling unit, eliminating the need for terminal strips on the motor body. Closed-loop control is obtained from resolver feedback, which provides rotor position signals to the drive during operation. Because the device is a motor for digital drive controllers, it is intended for use with matching electronic control hardware, and this arrangement supports accurate speed and position control during repeated machine cycles.
Frequently Asked Questions about MDD025A-N-100-N2G-040GF1:
Q: What type and torque of holding brake does the MDD025A-N-100-N2G-040GF1 motor offer?
A: The MDD025A-N-100-N2G-040GF1 is equipped with a blocking brake providing 1.0 Nm of holding torque.
Q: What type of feedback is implemented in the MDD025A-N-100-N2G-040GF1 motor?
A: This model features resolver feedback for precise motor position monitoring.
Q: What is the continuous torque at standstill for the MDD025A-N-100-N2G-040GF1?
A: The MDD025A-N-100-N2G-040GF1 provides a continuous torque of 0.33 Nm at standstill.
Q: What is the nominal speed of the MDD025A-N-100-N2G-040GF1 synchronous motor?
A: The motor has a nominal speed of 10,000 min⁻¹, allowing for high-speed operation.
Q: What is the shaft configuration of the MDD025A-N-100-N2G-040GF1 motor?
A: It includes a plain shaft with a shaft seal for effective protection against contaminants.
