★★★★★
4.94 based on 228 reviews

🙶 Excellent to work with and they stand behind their work. I would highly recommend them. 🙷

MDD021A-N-100-N2K-032GB0 Bosch Rexroth Indramat

In-Stock, Ships 3-5 Days

Preparing your secure checkout page...

The Bosch Rexroth Indramat MDD021A-N-100-N2K-032GB0 belongs to the MDD Synchronous Motors series and is a motor for digital drive controllers. It offers a nominal speed of 10,000 rpm with 0.15 Nm continuous torque at standstill, and features an integrated absolute encoder with resolver feedback. The motor has a plain shaft with a 32 mm centering diameter and a connector type positioned on Side B.

Warranty
Wake Industrial Warranty

Quote Request Form:

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The MDD021A-N-100-N2K-032GB0 is a synchronous motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it interfaces with compact servo amplifiers to drive small rotary axes, indexing tables, and spindle attachments in automated equipment. A plain shaft is supplied on the drive side, while the motor has no second shaft end, minimizing its overall length. This arrangement is suitable for restricted machine envelopes that require precise, high-speed motion.

The motor sustains a nominal speed of 10,000 rpm, enabling rapid positioning cycles with low-inertia loads. Its continuous stall torque is rated at 0.15 Nm, allowing the stator to produce this torque continuously while the rotor is locked. A centering collar with a diameter of 32 mm aligns the frame on mounting flanges and supports concentric coupling with gearheads or pulleys. All power and feedback plugs face the rear because the connection orientation is side B. The electrical interface uses a single circular connector to simplify cable routing within compact equipment. Rotor position is captured by an integrated absolute encoder, allowing the drive to obtain absolute angle data immediately after power-up without a homing routine.

Standard dynamic balancing reduces vibration during high-speed operation, and the aluminum housing retains the standard dimensions used for this frame. Sinusoidal commutation uses resolver feedback for reliable rotor-angle tracking in the presence of electrical noise. The frame corresponds to motor size 021 and uses length code A, providing a short magnetic stack with low mass. The plain output shaft is equipped with a shaft seal at the bearing shoulder to help prevent contaminants from entering the motor. The unit is supplied without a blocking brake, so drive torque or an external mechanical lock must hold the axis in position when required. Its compact frame and rear-facing connections leave additional clearance around the drive-side coupling and mounting flange.

Balancing
Standard
Centering Diameter
32 mm
Connection Direction
Side B
Connection Type
Connector
Continuous Torque at Standstill
0.15 Nm
Encoder
Integrated absolute encoder
Holding Brake
Without blocking brake
Housing
Standard
Motor Feedback
Resolver feedback
Motor Length Code
A
Motor Size
021
Nominal Speed
10000 min⁻¹
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Shaft Seal
With shaft seal
Shaft Type
Plain shaft

Frequently Asked Questions about MDD021A-N-100-N2K-032GB0:

Q: What is the nominal speed capability of the MDD021A-N-100-N2K-032GB0 motor?

A: The MDD021A-N-100-N2K-032GB0 can reach a nominal speed of 10,000 min⁻¹.

Q: What type of motor feedback does the MDD021A-N-100-N2K-032GB0 use?

A: This motor uses resolver feedback for motor feedback, allowing for precise position detection.

Q: What type of encoder does the MDD021A-N-100-N2K-032GB0 include?

A: The MDD021A-N-100-N2K-032GB0 features an integrated absolute encoder.

Q: What type of shaft configuration does the MDD021A-N-100-N2K-032GB0 use?

A: The shaft on this model is a plain shaft with a shaft seal for added protection against contaminants.

Q: Does the MDD021A-N-100-N2K-032GB0 motor come with a holding brake?

A: This motor is manufactured without a holding brake.


Internal Product Review

  • ‘‘The MDD021A-N-100-N2K-032GB0 is a high-speed motor for digital drive controllers from Bosch Rexroth Indramat. An integrated absolute encoder with resolver feedback supports precise commutation and stable motion control. A nominal speed of 10000 min⁻¹ makes this unit an excellent choice for demanding servo applications.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo