Product Description

The MCS020-3S-0120-NNNN coreless secondary part tends to become very hot during operation. The Bosch Rexroth secondary part is not designed for use with linear motors from other manufacturers. The product has a 020 size code. The accessory encloses permanent magnets with a synthetic resin coating. The unit mounting action is carried out after bringing the machine slide into a defined position on the machine bed. Its U-shaped yoke surrounds the related primary part. This product requires no additional cover for its magnets because of the existing coating. The part has a standard design. The accessory portrays the required details needed in case of a replacement or during service or maintenance on its type plate.

The secondary part does not depict a fixed position and is movable based on the need. The unit depicts a screwed steel base plate. Its iron components featuring a nickel plating offer a high level of assurance against corrosion. The part is compatible with a primary part of identical frame size. The accessory features no shielding magnetically. This unit is in compliance with one of the three categories of transportation for shipping by air of magnetic components. This secondary part encompasses a warranty tag for one year.

The part might trigger high heat dissipation if its contact surface is combined with a high heat-dissipating machine. The accessory installation can be done such that it features thermal isolation. The unit handling has to be done with extreme care and after wearing protective gloves. The product storage must be done only at room temperature. It can happen that the movement of the secondary part is not as much as that of the primary part, resulting in partial coverage between the two parts. This can result in reduced feed force. The shipping of this secondary part is done through a well-known logistics network with a worldwide presence.