Product Description:

The MCS030-3S-0300-NNNN is an ironless linear motor secondary part produced by Bosch Rexroth Indramat for the MCS Linear Motors series. As a passive track that mates with the energized primary mover, it supplies the magnetic circuit needed to generate controlled linear thrust in precision positioning tables, gantry axes, and pick-and-place modules. The component’s role is strictly mechanical and magnetic; it contains no coils, which allows zero cogging force and smooth travel when the automation system demands accurate, friction-free motion along the axis.

This secondary part has a cross-section depth of 25.0 mm and a width of 50.0 mm, giving a low profile that fits narrow carriage frames while maintaining lateral stiffness. Mounting holes are spaced on a 30.0 mm pitch so the segment can be secured to standard aluminum extrusion or steel baseplates without custom drilling. Its total length is 300 mm, which sets the active magnetic span that interacts with the forcer and influences the maximum continuous stroke when segments are installed end to end. Despite the internal magnet set, the unit weighs just 1.800 kg, which eases manual handling during machine assembly and minimizes the mass added to moving axes that carry the secondary part.

The enclosure classification is IP00, so the track must be installed inside a protected mechanical housing or beneath a cover strip to prevent contact with debris. For Variant 1 fastening, clearance holes with a diameter of 4.3 mm are provided, and screws tightened to 3.1 Nm secure the part without distorting the magnet bed. Variant 2 uses internal threads with a prescribed screw-in depth of 9 mm and a torque limit of 6.1 Nm, providing an alternative clamping arrangement when rear access is limited. These fastening options support installation on different linear axis layouts.