Product Description:

The MCP070M-V230-NI-N0CN-NNNN is a moving coil primary section in the MCP Linear Motors series. As an ironless linear motor, it produces thrust directly along a magnet track, allowing precise position control without ball screws or belts. In an automation line, this component couples to a secondary magnet rail and a drive amplifier to turn DC bus energy into controlled linear motion for pick-and-place tables, gantries, or indexing stages. The direct-drive layout helps the axis follow rapid changes in speed and position without the backlash associated with rotary-to-linear transmission parts. That arrangement is useful on machines that make frequent short moves and rapid reversals.

The cable exits from the front of the coil carrier, so the moving harness can follow the travel path with cleaner routing. Because the harness leaves at the moving end, cable management can be planned around the axis stroke instead of around a rotary junction. Thermal management relies on natural convection, so no fans or liquid plates are required inside the axis assembly. The mover is energized from a 300 VDC bus supplied by the servo drive, which places it in a voltage class commonly used in multi-axis machines. The unit uses an I-shape mounting interface that aligns with standard slot patterns, and motor size 070 identifies the coil width used for the matching secondary track and air gap.

For applications that need a longer active coil, the frame length code M extends the winding stack and increases continuous force without changing the overall width. The ironless construction eliminates cogging, which supports smooth low-speed travel and accurate contouring on inspection or metrology stages. The primary section pairs directly with MCP magnet plates and standard HVR or HCS drives, so it fits modular linear axes built around Rexroth motion components. This version does not include integrated hall sensors or liquid cooling.