MCP040B-V070-NI-N0CN-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911333642
The Bosch Rexroth Indramat MCP040B-V070-NI-N0CN-NNNN is an ironless linear motor from the MCP Linear Motors series. It features an I-shape mounting style, a front cable exit, and a motor size of 040. The motor operates with a DC bus voltage of 300 VDC and uses natural convection for cooling.
Internal Product Review
The MCP040B-V070-NI-N0CN-NNNN is an MCP ironless linear motor that benefits from natural convection cooling. An I-shape mounting style and front cable exit support clean mechanical integration and straightforward cable routing. The 300 VDC bus rating makes this motor an appealing option for precise linear motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MCP040B-V070-NI-N0CN-NNNN is a linear motor primary section built by Bosch Rexroth Indramat for the MCP Linear Motors series. Mounted on a magnet track, it creates thrust directly along the machine axis and eliminates mechanical transmissions and backlash. Because force is generated without belts, screws, or gear stages, the axis can respond quickly to command changes and maintain smooth travel. This arrangement makes it suitable for high-speed pick-and-place stations, gantry positioning modules, and precision electronic assembly lines where repeatable linear motion is required.
Electrical power is delivered through a DC link rated at 300 VDC. This bus arrangement supports the amplifier that energizes the coil set and produces controlled thrust along the guideway. Heat from the coils leaves the unit through natural convection, so no auxiliary fans or liquid loops are required. Motor and feedback leads exit from the front of the mover, allowing cable chains to run parallel to the travel path instead of crossing over it. The mover uses the 040 size platform, which fixes the cross-section and mounting hole pattern across the series. Its mechanical interface uses an I-shaped mounting style that slides into precision-ground slots on the secondary rail and locks with a single clamping bar.
The frame length code B indicates a longer coil stack, which increases force capability while keeping the footprint width constant. As an MCP ironless linear motor, the mover has no iron teeth, so attraction forces remain low and motion stays smooth during creeping travel or direction changes. It is supplied in a standard configuration and can be paired with external position sensors or Hall arrays when the application requires them. Compatible linear drive amplifiers supply commutation current and monitor thermal status during operation.
