Product Description:

The MCP030D-V180-NI-L1CN-NNNN from Bosch Rexroth Indramat belongs to the MCP Linear Motors series and is engineered as an ironless primary section for direct-drive positioning stages and gantries. By eliminating rotary-to-linear conversions, the unit delivers smooth force without cogging across the travel path. That operating behavior is useful in semiconductor handling, precision printing, and metrology axes where steady velocity, accurate positioning, and low detent are important.

The stator is energized from a DC bus of 300 VDC, giving the drive amplifier enough headroom to generate high slew rates along the magnetic track. Power and feedback conductors leave the carriage through a front cable exit, so energy chains can be routed parallel to the axis without creating cable loops behind the moving mass. Heat produced by winding losses is removed through natural convection, so no fans or liquid manifolds are required during operation. This version uses frame length D, which provides a longer active coil set than shorter versions in the same platform. The electromagnetic package is built on motor size 030, which helps keep moving inertia low while still providing the needed copper cross-section for continuous force production.

For commutation and position reference, the mover integrates a Hall unit that provides an analog output signal, allowing the controller to establish phase alignment immediately after power-up. Mechanical fixation follows the I-shape mounting style, so the coil assembly seats directly in standard guide rail arrangements without adapter plates. The product is classified as an MCP ironless linear motor, which means the coil carrier contains no magnetic iron and therefore avoids attractive forces toward the magnet track. This layout helps the axis move smoothly and supports applications where low moving mass and uniform linear motion are required.