Product Description:

The MCP030B-V180-NI-L1CN-NNNN is a linear motor primary section manufactured by Bosch Rexroth Indramat and supplied within the MCP Linear Motors series. As an ironless drive element, it produces force directly along the travel axis, eliminating gearboxes or ball screws and simplifying high-speed positioning tasks on pick-and-place gantries, packaging machines, and semiconductor handlers. Because the moving coil carries no ferromagnetic core, attraction forces to the secondary track are minimized, allowing smooth motion profiles and low detent for accurate servo regulation in tightly coupled multi-axis systems.

This model operates from a DC link of 300 VDC, so the associated drive controller must furnish that nominal bus level to obtain the rated force constant. Heat generated in the coil is removed by natural convection; no external fan or liquid circuit is required, which simplifies mechanical integration and reduces maintenance. Wiring leaves the unit through a front cable exit, a layout that supports carriers routed ahead of the carriage without loops over the travel path. Machine mounting surfaces are matched to the I-shape baseplate, giving two parallel reference planes for rigid alignment on aluminum frames. Electromagnetic geometry corresponds to Motor Size 030, which sets the active width and allowable continuous current density for medium-duty servo axes.

The stack depth indicated by Frame Length B extends the coil length and increases continuous thrust without changing the cross-section, which is useful when stroke length is fixed but payload grows. Position feedback is prepared for a Hall unit that supplies an analog output, enabling sinusoidal commutation and fine incremental control at low speed. The unit uses a standard design for this motor type, so no special execution is included. The product is an MCP Ironless Linear Motor, and it is intended for use with standard secondary tracks and shields.