Product Description:

The Bosch Rexroth Indramat MAF225C-0150-FQ-S2-KH0-35-N1 is an asynchronous motor from the MAF IndraDyn Asynchronous Motors series. It is a liquid-cooled housing motor intended to rotate process equipment or machine axes in automated production lines where continuous torque and a compact footprint are required. By converting three-phase drive power into mechanical motion at the output shaft, the motor supports regulated operation through encoder feedback and is suitable for packaging, forming, and material-handling equipment.

Thermal regulation is achieved through liquid cooling, and a 1/2-inch connection thread terminates the coolant circuit for direct plumbing into the machine cooling loop. The feedback channel uses an EnDat2.1 interface, and its single-turn absolute encoder provides 2048 increments per revolution while operating on a supply of 7-12 V, which supports closed-loop speed and position control. An IP65 enclosure protects the windings against dust and water jets, while the motor uses standard bearings, a plain shaft, and no shaft sealing ring. Flange and foot mounting points follow the 225 frame geometry so the motor can fit existing DIN-based machine layouts without special adapter hardware.

The motor has a rated speed of 1500 rpm, which matches the four-pole winding identified by code 0150. Its insulation system is class F, the vibration level is grade A, and the permissible ambient temperature range of 0-40 °C suits common industrial installations. Compliance with DIN EN 60034-14 supports the balance quality needed for direct coupling to gearboxes or belt drives. A C-length housing, a threaded liquid inlet, and the absence of a holding brake help reduce axial size while keeping the motor suitable for applications where frame dimensions, cooling integration, and vibration control must remain tightly managed.