Product Description:

The MAF225C-0150-FQ-S2-EG0-35-V1 is an asynchronous housing motor produced by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous housing motor, it delivers rotary drive power for conveyor sections, presses, and other automation axes that need continuous torque at moderate speed. The housing accommodates coolant passages and an encoder package, enabling the unit to operate as a compact drive element when paired with an inverter and position controller.

Its mechanical package is built around reinforced bearings that handle elevated radial and axial loads, while a plain shaft with a shaft sealing ring helps prevent lubricant escape and particle ingress. Heat is removed by liquid cooling, and coolant is routed through a connection thread sized 1/2 inch for standard hydraulic fittings. The turnable terminal box on the A-side lets power leads rotate for use in confined cabinets. Frame size 225 with length code C is paired with winding code 0150 in this motor. The motor is supplied without a holding brake and carries insulation class F for winding temperature limits. Position data comes from a single-turn absolute encoder that communicates over EnDat2.1 at a resolution of 2048 increments, supporting precise velocity and torque loops in the drive.

Rated speed is 1500 rpm, consistent with vibration level A in DIN EN 60034-14, so balancing criteria for smooth operation are met. The enclosure has an IP65 protection rating, and a shaft sealing ring further blocks coolant spray during washdown cycles. The motor can operate in ambient temperatures from 0 to 40 °C, while the encoder electronics draw power from 7 to 12 V supplied by the drive controller. Users can mount the unit with either flange holes or foot pads, and the turnable terminal box simplifies conduit entry after installation.