Product Description:

The MAF225C-0150-FQ-M2-HH0-05-N1 is an asynchronous induction motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It belongs to the manufacturer’s line of liquid-cooled housing units that integrate directly onto machine frames. In automated plants, this motor supplies continuous rotary torque for conveyors, extruders, and forming stations while allowing coolant to extract loss heat from the stator jacket, keeping winding temperatures within limits under sustained load.

Thermal control is managed by liquid cooling through a connection thread that terminates in a 1/2 inch port, so plant pipework can be attached without adapters. The rotor reaches a rated speed of 1500 rpm, a common setpoint for four-pole machines tied to 50 Hz inverters. With an enclosure rating of IP65, the housing blocks dust ingress and water jets, enabling installation next to washdown equipment. Position feedback is delivered by a multi-turn absolute encoder that reports 2048 increments per revolution, allowing drives to resolve angular position at sub-degree granularity during start-stop sequences. Class F insulation, winding code 0150, and flange mounting provide electromagnetic and mechanical compatibility with IEC frames.

The encoder communicates through EnDat2.1 and is powered from 7–12 V, eliminating the need for additional interface converters in modern servo drives. Vibration level A and a plain shaft reduce transmitted oscillations to connected gearboxes, while the omission of a holding brake and a shaft sealing ring simplifies maintenance in coolant-fed environments. The turnable terminal box on the B-side permits cable entry from any direction, supporting compact panel layouts. Operation is approved between 0 to 40 °C, and alignment with DIN EN 60034-14 keeps bearing, balance, and noise limits within standard industrial ranges without departing from the motor’s basic bearing configuration.