Product Description:

The MAF225C-0150-FQ-M2-EP0-35-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It is a liquid-cooled drive element intended for continuous-duty industrial automation where stable torque and compact installation are required. The design supports both flange and foot mounting, so machine builders can align the frame size 225 stator in horizontal or vertical orientations without extra adapters. A turnable terminal box on the A-side simplifies power cabling.

The stator jacket uses liquid cooling through a 1/2 inch connection thread, allowing high thermal loads to be removed without external fans. Standard bearings, shaft balancing with a complete key, and a shaft sealing ring help limit vibration and reduce fluid ingress around the keyed shaft. Feedback is delivered by a multi-turn absolute encoder with a resolution of 2048 increments; data is transmitted over the EnDat2.1 digital interface, and the encoder is powered by 7-12 V. The motor comes without a holding brake, so external mechanical retention must be used during power-off conditions. Insulation class F windings marked by winding code 0150 withstand elevated copper temperatures, and frame length code C keeps the overall length moderate for enclosure layouts.

Ingress protection is rated at IP65, helping keep dust and water spray away from internal parts. The motor also conforms to DIN EN 60034-14 for vibration behavior. At a rated speed of 1500 rpm, the asynchronous rotor suits process lines while the balanced shaft helps limit oscillations transmitted to connected couplings. Continuous operation is permitted from 0 to 40 °C, which aligns with typical industrial ambient conditions. The standard bearing arrangement, foot-and-flange interfaces, and threaded coolant connection make the unit suitable for pump modules, mixers, or extruder zones that already use threaded coolant manifolds and side-access terminal wiring.