Product Description:

The MAF225C-0150-FQ-C0-KP0-35-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As a three-phase drive element, it converts electrical power into mechanical rotation for conveyor sections, forming machines, and other continuous-duty stations that require steady speed regulation. Its enclosed housing supports operation in sealed production cells and machining centers where stable thermal behavior and dependable motor output are important. The design is suited to installations where ambient airflow is limited and motor performance must remain consistent over long operating periods.

The active cooling circuit uses liquid cooling and connects through a 1/2 inch threaded port machined into the housing, which helps simplify hose routing and keep flow resistance low. Rotor position feedback comes from an incremental encoder with 2048 increments per revolution, and the encoder operates from a 5 V supply so it can interface with standard drive controllers. Under rated conditions, the shaft reaches 1500 rpm, which supports stable operation in four-pole, 50 Hz applications. The cooling connection follows DIN EN 60034-14 guidelines, and the motor uses the standard bearing arrangement for this frame.

The motor uses flange and foot mounting, and the stator size of 225 with frame length code C provides a consistent installation envelope for retrofit work. The housing is sealed to IP65, and the winding insulation is rated F, allowing internal temperatures up to 155 °C. The shaft has a keyway, is balanced with a complete key, and uses a shaft sealing ring to help limit lubricant escape. The motor is supplied without a holding brake, is intended for ambient temperatures from 0 to 40 °C, and meets vibration level A for continuous duty.