MAF225C-0100-FQ-S2-EG0-35-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911332185
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF225C-0100-FQ-S2-EG0-35-N1 is part of the MAF IndraDyn Asynchronous Motors series and features liquid cooling with a 1/2 inch connection thread. It has an IP65 protection class and supports flange and foot mounting. The motor includes a single-turn absolute encoder with EnDat2.1 interface at 2048 increments and operates at a rated speed of 1000 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF225C-0100-FQ-S2-EG0-35-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat and assigned to the MAF IndraDyn Asynchronous Motors series. As a three-phase induction motor, it delivers constant torque at low speeds, which makes it suitable for extruders, test stands, and mixers that must run continuously under closed-loop inverter control. This housing design helps keep surface temperatures low, so the motor can be installed in compact machine frames without added forced-air ducting.
It operates at a rated speed of 1000 rpm. The frame size 225 provides a stator cross-section that supports torque while matching DIN EN 60034-14 interfaces. Heat is removed through liquid cooling, and coolant enters through a 1/2 inch connection thread that fits common hose systems. Position feedback is supplied through the EnDat2.1 interface for absolute position data and diagnostic functions. The motor is built without a holding brake, uses standard rolling bearings, has vibration level A, and uses a plain shaft with a sealing ring. Power conductors enter from the A-side through a turnable terminal box, and frame length code C balances active iron length with the overall motor envelope.
The feedback system resolves one turn into 2048 increments, which supports precise speed control and quick stall detection. The motor is sealed to IP65, and insulation class F permits winding temperatures up to 155 °C. Continuous duty is permitted in ambient air from 0 to 40 °C, and operation outside that range requires derating. Machined foot or flange holes help maintain alignment during installation, and the plain shaft supports direct coupling to gearboxes or belt drives. These features make the motor well suited for continuous industrial duty where stable torque, sealed construction, and liquid heat removal are required.
Frequently Asked Questions about MAF225C-0100-FQ-S2-EG0-35-N1:
Q: What type of cooling system does the MAF225C-0100-FQ-S2-EG0-35-N1 motor use?
A: This model uses liquid cooling and is equipped with a 1/2 inch connection thread for its cooling system.
Q: What encoder type and interface are used on the MAF225C-0100-FQ-S2-EG0-35-N1 motor?
A: The MAF225C-0100-FQ-S2-EG0-35-N1 features an EnDat2.1 interface with a single-turn absolute encoder and 2048 increments resolution.
Q: What level of protection does the MAF225C-0100-FQ-S2-EG0-35-N1 offer against dust and water?
A: This motor is designed with IP65 protection, making it resistant to dust and water jets from any direction.
Q: What is the shaft configuration of the MAF225C-0100-FQ-S2-EG0-35-N1 motor?
A: This model comes with a plain shaft and is fitted with a shaft sealing ring for added protection.
Q: What mounting styles are available for the MAF225C-0100-FQ-S2-EG0-35-N1 motor?
A: The mounting style for this motor allows both flange and foot mounting options.
