Product Description:

The MAF225C-0100-FQ-S2-DH0-05-N1 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. As a flange-mounted drive element, it converts electrical energy into continuous rotational torque for conveyors, presses, and other automated equipment that require stable speed regulation. The model integrates a single-turn absolute encoder to supply position feedback to servo drives, enabling closed-loop control in industrial automation cells.

At a rated speed of 1000 rpm, the rotor delivers constant mechanical output suited to low-speed, high-torque production tasks. Heat is extracted by a liquid cooling circuit that uses a 1/2-inch connection thread, allowing coolant to circulate around the stator and reduce thermal derating. The single-turn encoder provides 2048 increments of resolution and communicates over the EnDat2.1 interface, so position data reaches the controller with digital accuracy. A frame size of 225 with length code C indicates the external diameter and active core length for use with large-frame gearboxes and pulleys. Winding code 0100 identifies the conductor cross-section and electrical impedance used with the associated inverter, while a 7 to 12 V supply powers the feedback device.

The housing carries an IP65 rating, which helps keep dust and water jets away from live parts during operation. Reliable service is maintained at ambient temperatures from 0 to 40 °C. The motor uses a plain shaft to transmit torque without keyways, and the lack of a shaft sealing ring reduces contact friction in clean operating areas. The rotor is balanced to vibration level A, the bearings use a standard configuration, and insulation class F supports winding temperatures up to 155 °C. Installation uses flange mounting, and the turnable terminal box is positioned on the right. The motor is supplied without a holding brake.