Product Description:

The MAF180D-0200-FR-S6-HK0-35-V1 belongs to the MAF IndraDyn Asynchronous Motors series from Bosch Rexroth Indramat. It is a liquid-cooled asynchronous housing motor intended to drive machinery where compact dimensions and stable thermal behavior are required. By combining the mechanical stiffness of an IEC 180 frame with precise electronic feedback, this motor serves conveyor, forming, and spindle axes that need constant torque delivery under elevated duty cycles in industrial automation.

This model employs liquid cooling, and the coolant enters through an enclosed rapid-action coupling sized at 1/2 inch, which permits fast line changes while helping prevent leaks. Position data come from an encoder that communicates via the EnDat2.1 interface; its optical disk generates 2048 increments per revolution, enabling fine velocity control over the full operating range. The stator windings use insulation rated to class F, supporting continuous service without thermal breakdown. At a rated speed of 2000 rpm, the rotor can deliver rated output, while the 15 m shielded encoder cable maintains signal fidelity in electrically noisy environments. The turnable terminal box on the B-side aligns the three-phase supply conductors with cabinet layouts, and reinforced bearings are fitted to handle belt tension or radial loads common in production lines.

An ingress protection rating of IP65 seals the housing against dust and water jets, while the shaft is balanced with a half key to keep residual vibration within Vibration level A. Flange-and-foot mounting holes conform to DIN EN 60034-14. A shaft sealing ring helps prevent coolant or lubricant ingress, and the keyed shaft simplifies coupling to pulleys. The motor is supplied without a holding brake, reducing inertial mass for cyclic starts. Continuous operation is supported between 0 °C and 40 °C.