Product Description:

The MAF180D-0200-FR-S2-KK0-35-V1 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Designed for integration with industrial drive systems, the motor converts electrical power into regulated mechanical torque for indexing tables, extruders, and other continuously driven loads. Its housing and flange format allow the unit to mount directly on machine frames, and its design supports closed-loop feedback for stable speed under changing process conditions.

The housing has an IP65 rating, and thermal energy is removed through liquid cooling routed to an internal jacket. Coolant enters and leaves through an enclosed rapid-action coupling sized at 1/2 inch, so hoses can be serviced without draining the entire circuit. Mechanical attachment is provided by flange and foot mounting, while reinforced bearings and vibration level A keep shaft motion within DIN limits. The rotor is balanced with a half key, a shaft sealing ring protects the interior, and the shaft includes a keyway for positive torque transfer. For feedback, the motor uses a single-turn absolute encoder that communicates through EnDat2.1 and provides 2048 increments per revolution, allowing the drive to monitor angular position during each revolution.

The encoder electronics operate from 7–12 V, and their data support vector control at the motor’s rated speed of 2000 rpm. Class F winding insulation gives the stator conductors a 155 °C thermal limit, while the liquid circuit and the 0 to 40 °C ambient range help keep temperatures within normal operating conditions. Compliance with DIN EN 60034-14 keeps residual imbalance within the stated vibration limits even when frame size 180, length code D, and winding code 0200 are combined. The motor is supplied without a holding brake, so standstill holding must come from drive torque or external mechanics.