MAF180D-0200-FQ-S2-FH0-35-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911321958
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF180D-0200-FQ-S2-FH0-35-N1 is a liquid-cooled asynchronous housing motor from the MAF IndraDyn Asynchronous Motors series. It features flange and foot mounting, a plain shaft, and an IP65 protection class. The motor uses a single-turn absolute encoder with an EnDat2.1 interface and has a rated speed of 2000 min-1.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF180D-0200-FQ-S2-FH0-35-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As a three-phase drive element, it converts electrical energy from an inverter into rotary motion for conveyors, mixers, pumps, and other continuous-duty equipment in industrial automation. The coolant circuit removes heat directly from the stator, allowing the motor to maintain rated output in sealed cabinets and in areas where forced air cannot be used. This cooling method is useful where restricted airflow or airborne debris makes fan-based cooling less practical.
At its rated operating point, the rotor turns at 2000 rpm, and the housing is protected to IP65, so dust and water jets do not interfere with operation. Heat is removed through liquid cooling, with coolant routed to external chillers through a connection on the motor end shield. Position data is supplied by a single-turn absolute encoder that communicates via EnDat2.1 at 2048 increments of resolution, with a 7 to 12 V supply provided by the drive. Standard bearings support the plain shaft, and the design omits a holding brake and a shaft sealing ring to minimize drag. Frame size 180 with frame length code D suits medium-power machinery, and winding code 0200 indicates the stator electrical characteristics. Flange and foot mounting points permit rigid installation in horizontal or vertical orientations.
The motor conforms to DIN EN 60034-14 and achieves vibration level A, which limits oscillation transmitted to connected machinery. Windings are insulated to class F, supporting continuous thermal loading when the coolant circuit and ambient temperature stay within 0 to 40 °C. The liquid circuit uses a 1/2 inch threaded port, which matches common hydraulic fittings and simplifies hose selection. Even without a shaft seal, the IP65 enclosure helps keep contaminants away from internal components, and the plain shaft geometry eases coupling to belts, gearboxes, or direct-drive hubs.
Frequently Asked Questions about MAF180D-0200-FQ-S2-FH0-35-N1:
Q: What type of encoder and interface are provided on the MAF180D-0200-FQ-S2-FH0-35-N1 motor?
A: The MAF180D-0200-FQ-S2-FH0-35-N1 uses a single-turn absolute encoder with EnDat2.1 interface and a resolution of 2048 increments.
Q: What type and size of cooling connection does the MAF180D-0200-FQ-S2-FH0-35-N1 offer?
A: Liquid cooling is supported through a connection thread with a 1/2 inch thread size on this motor.
Q: Does the MAF180D-0200-FQ-S2-FH0-35-N1 motor include a holding brake?
A: This model is manufactured without a holding brake.
Q: What is the protection class rating for the MAF180D-0200-FQ-S2-FH0-35-N1 motor?
A: The MAF180D-0200-FQ-S2-FH0-35-N1 has a protection class of IP65 for use in demanding environments.
Q: What mounting styles are available for the MAF180D-0200-FQ-S2-FH0-35-N1 asynchronous motor?
A: This motor can be mounted using both flange and foot mounting methods.
