Product Description:

The MAF180D-0200-FQ-S2-EH0-35-N3 is an asynchronous housing motor produced by Bosch Rexroth Indramat and supplied within the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled unit, it is intended for drive axes that run continuously at moderate speed while removing high losses from tight machine envelopes in industrial automation cells. The motor converts electrical energy into mechanical shaft power so that conveyors, extruders, or forming stations can maintain commanded velocity profiles under sustained load.

This model reaches a rated speed of 2000 rpm, which suits medium-inertia applications that require stable torque across the working range. Its stator jacket uses liquid cooling, and heat is removed through an internal channel that connects to an external circuit by a threaded adapter. The housing has an IP65 protection class, so airborne dust and low-pressure water jets do not enter the interior. Position feedback is generated by a single-turn absolute encoder with 2048 increments and communication over the EnDat2.1 interface for digital position tracking. The motor uses standard rolling-element bearings to limit axial and radial play, has insulation class F windings, and comes without a holding brake. It can be mounted by flange or foot, and the turnable terminal box on the A-side provides the power connection and simplifies cable routing.

The cooling circuit attaches through a 1/2 inch connection thread, and the feedback device draws logic power from a 7–12 V supply delivered by the controller. Compliance with DIN EN 60034-14 means the vibration values follow recognized limits, while the permissible ambient temperature range of 0–40 °C covers most enclosed production floors. The motor has frame size 180 and frame length code D, with winding identification 0200 for the electrical layout used in this version. It also has a plain shaft without a sealing ring, which suits machinery that already provides external sealing or operates in clean, coolant-contained housings.