Product Description:

The MAF180D-0200-FQ-S2-DQ0-35-N3 is a liquid-cooled asynchronous housing motor developed by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Built as a drive source for automated machinery, it converts three-phase electrical energy into rotary motion while housing channels carry coolant to remove heat during continuous duty. The design targets installations that need steady torque delivery without an internal brake mechanism, such as production conveyors or process pumps, and it supports flange or foot mounting for integration with standard machine frames.

This model relies on liquid cooling circulated through a 1/2 inch connection thread, a feature that keeps stator temperature low and preserves the insulation system. Position feedback is handled by an EnDat2.1 interface that feeds the drive controller with absolute rotor angle data at 2048 increments, and the encoder operates from a regulated supply of 7-12 V. It is a single-turn absolute device, so one mechanical revolution is uniquely encoded. The motor is supplied without a holding brake, so external measures must secure the load at standstill. Winding code 0200 indicates the copper layout and resistance, while insulation class F allows winding temperatures up to 155 °C. The stator uses vibration grade B, and power is connected through a turnable terminal box on the right to reduce cable stress when the box is rotated for alignment.

An ingress rating of IP65 protects the frame against dust and low-pressure water jets, and the rated speed is 2000 rpm, which suits medium-inertia drive axes. The motor operates in ambient temperatures from 0 to 40 °C with the standard bearing set. Mechanical stability comes from balanced-with-key shaft geometry, a keyed drive end, and the absence of a shaft sealing ring where external sealing is handled by the coupled machine. Frame size 180 and length code D increase the iron stack for higher torque density. The motor complies with EN 60034-14 for vibration, and the combined flange and foot mounting pattern simplifies alignment on baseplates or gearboxes.