Product Description:

The MAF180D-0200-FQ-S2-DH2-35-N1 is an asynchronous drive motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It is installed as the primary rotary actuator in automated machinery, where regulated electrical power is translated into controlled shaft motion for pumps, extruders, or conveyor zones. By embedding a digital position encoder and accommodating external coolant lines, the unit supports closed-loop control and high thermal loads, making it suitable for duty cycles that exceed the limits of air-cooled industrial motors. The integrated feedback system also allows the connected drive to monitor rotor position without a separate external sensor assembly.

The motor uses liquid cooling through a 1/2 inch connection thread, removing heat directly from the stator and permitting continuous torque at low ambient airflow. An EnDat2.1 interface transmits position and speed data from the internal single-turn absolute encoder, and the feedback system provides 2048 increments of resolution with a supply of 7–12 V. This supports fine commutation and stable speed regulation across varying load conditions. The feedback assembly, standard bearings, and the right-side turnable terminal-box power entry simplify installation in tight machine frames. The motor has frame size 180, length code D, and winding code 0200, which helps match it to compatible Rexroth inverters and machine layouts.

The housing is rated IP65, so dust and water jets do not interfere with operation. A plain shaft is supplied without a shaft sealing ring, which allows direct coupling where sealing is handled elsewhere in the machine. The motor reaches a nominal speed of 2000 rpm, and its class F windings tolerate temperatures up to 155 °C. It also uses flange and foot mounting, while vibration severity remains within level A according to DIN EN 60034-14 and ambient air stays between 0 °C and 40 °C.