Product Description:

The MAF180D-0200-FQ-S2-DH0-35-N3 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. The unit delivers three-phase torque for conveyor lines, presses, and other continuous-duty automation axes where efficient heat removal is required. Mounted with either flange or foot mounting, it provides a compact alternative to externally ventilated motors while still meeting demanding speed and load requirements. Its sealed construction also allows installation in enclosed machine spaces where consistent cooling performance is needed.

The mechanical envelope corresponds to frame size 180 with length designation D, and winding code 0200 is intended for medium-speed duty. Shaft output is transmitted through a plain steel stub, no shaft sealing ring is installed, and the motor is supplied without a holding brake, so external locking must be used when static torque is required. Nominal speed reaches 2000 rpm. Heat is removed by liquid cooling, which circulates through an integrated 1/2 inch connection thread in the housing and supports stable thermal operation. Electrical leads enter from the right through a rotatable terminal box, and the bearings use the standard configuration for this frame.

Position feedback is supplied by a single-turn absolute encoder that communicates through the EnDat2.1 serial interface and provides 2048 increments per revolution. Its supply voltage of 7 to 12 V is provided by the drive controller. The stator windings use class F insulation, and the assembly has an IP65 protection rating that helps keep dust and water jets away from live parts. Operation is permitted in ambient temperatures from 0 to 40 °C. Mechanical balance is maintained at vibration level B in accordance with DIN EN 60034-14, including installations that use combined flange and foot mounting.