Product Description:

The MAF180D-0200-FQ-M2-DH2-35-V1 from Bosch Rexroth Indramat belongs to the MAF IndraDyn Asynchronous Motors series and is a liquid-cooled asynchronous housing motor for industrial automation. It is intended for drive systems that need stable thermal behavior and steady torque during continuous operation. The motor housing is suited for rigid installation in production machinery, where controlled cooling helps maintain consistent performance under load. It fits applications such as processing lines, handling systems, and other automated equipment that must operate for long periods with predictable motor response.

The motor uses liquid cooling through a 1/2-inch connection thread, and this hydraulic circuit removes stator heat more efficiently than airflow, helping prevent derating at the rated speed of 2000 rpm. Reinforced bearings and vibration level A reduce shaft deflection and transmitted vibration during continuous duty. Feedback is handled by an EnDat2.1 interface connected to a multi-turn absolute encoder, and the encoder resolves rotor angle to 2048 increments. Frame size 180 with length code D provides the active iron and copper volume used by the motor, while winding code 0200 sets the electrical values expected by the matched inverter.

The encoder electronics operate from 7–12 V, allowing direct connection to standard drive controllers without auxiliary converters. A right-side turnable terminal box handles the power leads, and flange and foot mounting supports installation on machine walls or base plates. The housing is rated IP65, which keeps out dust and low-pressure water jets, and the windings use class F insulation for thermal endurance up to 155 °C. The motor also has a plain shaft without a sealing ring, and it is intended for operation in ambient temperatures from 0 °C to 40 °C while following DIN EN 60034-14 for mechanical balance.