MAF180D-0200-FQ-C0-KP0-35-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911324993
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF180D-0200-FQ-C0-KP0-35-N1 is part of the MAF IndraDyn Asynchronous Motors series and features liquid cooling with a 1/2 inch connection thread. This motor has a rated speed of 2000 min-1, flange and foot mounting, and an IP65 protection class. It comes with a standard bearing, an incremental encoder with 2048 increments, and is constructed to insulation class F.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF180D-0200-FQ-C0-KP0-35-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As an induction motor for servo-class drives, it converts electrical energy into controlled rotary motion for heavy-duty axes that require accurate speed regulation under changing process loads. The motor is intended for direct connection to a drive inverter and the machine load, making it suitable for presses, extruders, and conveyor modules used in automated manufacturing cells. When paired with a compatible controller, it supports stable operation in applications where continuous production and repeatable motion are important.
Heat removal relies on liquid cooling, and the coolant ports use a 1/2 inch connection thread so standard industrial hoses can be attached directly. An incremental encoder with 2048 increments provides rotor position data, and its electronics operate from a regulated 5 V supply from the controller. The rotor reaches a rated speed of 2000 rpm, and the cast housing has an IP65 protection rating that helps keep out dust and low-pressure water jets. This combination supports closed-loop control while allowing the motor to operate in production areas where contamination or surface spray may be present.
The drive train is intended for continuous service in ambient temperatures from 0 to 40 °C. The motor uses insulation class F, which provides thermal margin when coolant flow is briefly reduced. Compliance with DIN EN 60034-14 keeps vibration at level A, which helps protect nearby couplings and sensors during operation. Frame size 180 with length code D and winding code 0200 suits medium-torque duties. The motor uses flange and foot mounting with standard bearings, and the keyed shaft is balanced with a complete key to support rigid coupling arrangements. A shaft sealing ring helps keep moisture and contamination away from the bearing area, and because the motor does not include a holding brake, suspended loads must be secured by external means.
Frequently Asked Questions about MAF180D-0200-FQ-C0-KP0-35-N1:
Q: What type of shaft and sealing configuration does the MAF180D-0200-FQ-C0-KP0-35-N1 motor feature?
A: The MAF180D-0200-FQ-C0-KP0-35-N1 motor uses a shaft with a keyway and a shaft sealing ring for secure connection and protection.
Q: What cooling method is used on the MAF180D-0200-FQ-C0-KP0-35-N1 and what is the connection size?
A: This motor is equipped with a liquid cooling system that uses a 1/2 inch connection thread for efficient heat dissipation.
Q: Which type of encoder and resolution are present in the MAF180D-0200-FQ-C0-KP0-35-N1?
A: The included incremental encoder provides 2048 increments at a 5 V supply voltage.
Q: What mounting style does the MAF180D-0200-FQ-C0-KP0-35-N1 motor support?
A: The MAF180D-0200-FQ-C0-KP0-35-N1 is designed for flange and foot mounting arrangements.
Q: What level of environmental protection does the MAF180D-0200-FQ-C0-KP0-35-N1 motor offer?
A: This motor is constructed to protection class IP65, providing solid protection against dust and low-pressure water jets.
