Product Description:

The MAF180D-0200-FO-M0-35-R1 motor is produced by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. This liquid-cooled asynchronous motor is intended for industrial automation tasks that need sustained torque with minimal thermal drift. Heat is extracted through an internal coolant circuit around the stator, so the motor can hold rated output without additional external fans. Because the cooling circuit is built into the housing, thermal conditions stay stable during long production runs and repeated load changes. It is used on machine tools, printing lines, and conveyor sections where a compact, sealed, and easy-to-service drive package is required.

The enclosure is rated IP65, so dust cannot enter and the housing tolerates low-pressure water jets, making the motor suitable for washdown zones without additional covers. Its mechanical design supports a rated speed of 2000 rpm, which matches 50 Hz inverter output when four electrical poles are used and provides a balance between torque density and bearing life. Stator insulation is classified as F, allowing winding temperatures up to 155 °C before degradation. Operation is permitted in ambient conditions from 0 to 40 °C, which fits most factory floor environments without power derating in that range. The motor uses a liquid-cooled jacket to limit thermal expansion and support continuous duty cycles.

The motor has a frame size of 180, which corresponds to a mounting flange of about 180 mm in diameter. The frame length code D indicates the longest stator stack offered for this diameter, giving higher continuous torque than shorter lengths. A longer active core adds magnetic length for torque production without changing the basic mounting diameter. Winding code 0200 uses a turn count and conductor cross section suited to the 2000 rpm base speed, helping the motor work efficiently with standard IndraDrive inverters.