Product Description:

The MAF180D-0150-FQ-S2-FH0-35-N1 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It delivers mechanical power in automated lines that need continuous torque without overheating. Frame size 180 and length code D set its mounting envelope, and the standard bearing system matches common industrial replacement parts. Flange and foot mounting options let designers position the unit either on a base plate or directly on machine walls. The housing-style design supports installation where the motor body must remain compact while still handling sustained production loads.

The motor is rated for 1500 rpm, a value that aligns with 4-pole induction geometry on 50 Hz networks and simplifies gearbox selection. Heat is removed through integrated channels that use liquid cooling, and 1/2-inch connection threads provide a sealed interface to plant chillers. Feedback comes from a single-turn absolute sensor that transmits EnDat2.1 data with 2048 increments, giving the control system fine position resolution at low speed. The encoder electronics accept a 7–12 V supply. Environmental ingress protection is rated IP65, so the motor can be washed down without water reaching the windings. Because the unit is supplied without a holding brake, static load restraint must be provided externally.

Compliance with DIN EN 60034-14 limits vibration to level A, helping protect nearby precision equipment. The insulation system is class F, and safe use is specified for ambient temperatures between 0 to 40 °C. A plain shaft is supplied without a shaft sealing ring, reducing friction where external sealing is not required. Standard bearings support the permissible radial loads for winding code 0150. The shaft arrangement also allows direct coupling where a keyed connection is not required.