Product Description:

The MAF180D-0150-FQ-S2-EG0-35-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. In automated plants, it supplies controlled rotary motion to pumps, conveyors, or spindle assemblies that require steady torque at industrial line speeds. Coolant channels built into the housing help maintain stable operating temperatures during prolonged duty, and the overall housing format suits machine layouts that use common industrial mounting arrangements. This design makes the motor suitable for enclosed production equipment where continuous operation and predictable thermal behavior are important.

Rated speed reaches 1500 rpm, allowing direct drive of equipment designed around standard four-pole synchronous speeds without extra gearing. Heat is removed through liquid cooling, and the coolant circuit connects through a 1/2 inch thread so standard industrial hose fittings can be used. The enclosure has an IP65 rating that helps block dust and water jets during washdown. Rotor position feedback is transmitted through EnDat 2.1, and the controller receives absolute single-turn data with 2048 increments for closed-loop speed and torque control. This feedback arrangement supports accurate regulation during variable-load operation.

The mechanical envelope uses frame size 180 with length code D, giving a balanced ratio between power density and shaft stiffness for medium-sized machinery. The windings use insulation class F, and operation is intended for ambient air from 0 to 40 °C. Installation uses flange and foot mounting, a plain shaft with a sealing ring, and a rotatable terminal box on the A-side for power cabling. The motor operates without a holding brake, conforms to vibration level A under DIN EN 60034-14, and uses standard bearings for long service intervals.