Product Description:

The MAF180D-0150-FQ-M0-FG0-35-R1 belongs to the MAF IndraDyn Asynchronous Motors series manufactured by Bosch Rexroth Indramat. It is a liquid-cooled asynchronous housing motor intended for constant-duty drives in industrial automation, including equipment that operates under high load for extended periods. The design uses motor frame size 180 with frame length code D, giving the unit a large mechanical envelope within the series. Winding code 0150 identifies the electrical layout used for this variant. Cooling lines attach by a dedicated connection thread, allowing the motor to integrate into closed-loop coolant circuits common on high-power machinery.

The stator is rated for a continuous speed of 1500 rpm, a value that aligns with four-pole, 50 Hz supply systems and simplifies gearbox selection. Protection class IP65 keeps dust and low-pressure water jets from reaching internal components, while liquid cooling transports heat directly away from the windings to stabilize temperature under high torque. The coolant path is accessed through a 1/2 inch thread that matches standard industrial hose fittings. The permissible ambient range of 0 to 40 °C lets the motor run in typical factory environments without derating. The threaded coolant connection helps maintain a tight seal around the coolant circuit.

The unit is supplied without a holding brake, so external methods must secure the load at standstill. Shaft leakage is limited by a shaft sealing ring, which helps keep lubricant inside adjoining drivetrain components while reducing contaminant entry at the motor shaft. The housing supports flange and foot mounting, so the motor can be installed on bases or vertical panels. Class F insulation allows winding temperatures up to 155 °C, which provides thermal margin during short overload periods. Vibration level A meets DIN EN 60034-14 limits for balanced rotors.