Product Description:

The MAF180D-0150-FQ-C0-EQ0-35-N3 is an asynchronous housing motor manufactured by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed for continuous-duty industrial automation, the motor removes heat through an external coolant circuit so it can support high power density in enclosed machine layouts. An integrated incremental encoder provides real-time rotor feedback, allowing the drive controller to maintain stable speed regulation during positioning and process-control tasks. The motor is intended for applications that require dependable operation under sustained load rather than short intermittent cycles.

Electrically, the motor reaches a rated speed of 1500 rpm, which suits applications driven from 50 Hz inverter output. Heat is removed by liquid cooling through a 1/2-inch connection thread, helping keep the windings within class F insulation limits during continuous use. The enclosure carries an IP65 rating to resist dust and water jets in industrial settings. The incremental encoder provides 2048 increments, and its electronics operate from a 5 V supply so the drive can read speed changes accurately. Standard bearings and vibration level B help support smooth running during steady operation.

The mechanical interface follows DIN EN 60034-14 and supports a flange-and-foot mounting arrangement for common machine layouts. A turnable terminal box on the A-side provides the power connection and can be rotated to suit available cable-entry space. Operation is permitted at ambient temperatures from 0 to 40 °C. The shaft is made with a keyway and is supplied without a shaft sealing ring, so the coupling area should be kept free of fluids and contaminants. Because the motor does not include a holding brake, external restraint is required when a load must remain fixed after power is removed.