Product Description:

The MAF180D-0100-FR-S2-EQ0-35-V1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It carries frame size 180, frame length code D, and winding code 0100, placing it among the higher-torque units in the product line. The assembly can be mounted by flange or foot, and power is supplied on the A-side to support integration with existing machine layouts. At a rated speed of 1000 rpm, it is suited for heavy conveyor, press, or spindle axes that require continuous duty in enclosed spaces where forced air is limited. The motor is supplied without a holding brake, so position retention must be handled by the drive or by external mechanical components.

Process heat is removed through liquid cooling circulated by an enclosed rapid-action coupling, which helps keep stator temperature stable when ambient air remains between 0 °C and 40 °C. The power conductors enter through an A-side turnable terminal box, giving the cable entry flexible exit angles. Insulation class F allows the windings to withstand elevated internal temperatures, while a protection rating of IP65 helps keep dust and water jets away from internal parts. The rotor is balanced with a complete key, and reinforced bearings work with vibration level A limits to reduce radial force on the machine frame. This arrangement supports stable operation in installations that demand durable mechanical alignment over long operating periods.

Axis feedback relies on a single-turn absolute encoder that communicates through EnDat 2.1, and its resolution of 2048 increments gives the drive fine position granularity. The sensor electronics accept 7–12 V from the controller, so no separate supply is required for encoder operation. Cooling water reaches the jacket through a 1/2 inch rapid-action fitting, allowing the coolant connection to be made without tools. Because there is no shaft sealing ring, the keyed shaft operates with lower friction at the seal location. Compliance with DIN EN 60034-14 confirms that the motor meets class A vibration values across its 1000 rpm operating range.