Product Description:

The MAF180D-0100-FQ-S2-EQ2-35-N1 is a liquid-cooled asynchronous motor manufactured by Bosch Rexroth Indramat for integration into the MAF IndraDyn Asynchronous Motors series. Designed as a housing motor for drive systems that require continuous torque density without added acoustic load, it uses an external coolant circuit to remove heat so the drive can maintain rated output in compact installations such as presses or extruders. This part serves as the rotary element within an industrial automation axis where speed is regulated through an encoder-based feedback loop.

The motor reaches a rated speed of 1000 rpm by matching winding code 0100 with the 180 mm frame size in a D-length housing. Thermal management relies on liquid cooling routed through a connection thread sized at 1/2 inch. This circuit allows the stator to operate continuously while standard class bearings support axial and radial loads. Position feedback is supplied by a single-turn absolute encoder that delivers 2048 increments through an EnDat2.1 interface powered from a 7 to 12 V supply. The shaft is balanced with a full key and cut with a keyway, and it is supplied without a shaft sealing ring when an external seal is not needed. Installation is simplified by flange and foot mounting points, while a turnable terminal box on the A-side accepts the main power leads. Vibration and balancing follow DIN EN 60034-14.

The housing carries a protection rating of IP65, sealing the stator against dust ingress and water jets. Its windings use insulation class F to allow elevated internal temperatures without dielectric breakdown. Continuous service is specified for ambient conditions between 0 – 40 °C, and dynamic suitability is confirmed by vibration severity level A. The liquid circuit connects through its dedicated thread without adapters, and the power terminal box remains locked in its chosen orientation during installation.