Product Description:

The MAF180C-0200-FR-M6-FG0-35-N1 belongs to the MAF IndraDyn Asynchronous Motors series and is delivered as a liquid-cooled asynchronous housing motor for industrial automation. Integrated flange and foot mounting allows the motor to be secured to a base frame while maintaining accurate alignment with the driven equipment. In production cells, the motor supplies continuous rotational power while coolant channels in the housing help limit thermal drift at the bearings and nearby sensing components. The housing style supports direct integration into machine frames where space around the motor is limited and a clean exterior profile is preferred.

The motor uses liquid cooling, and coolant enters and leaves through an enclosed rapid-action coupling sized at 1/2 inch. Position feedback travels to the drive controller over a digital EnDat 2.1 interface, enabling high-resolution commutation with the multi-turn absolute encoder’s native 2048 increments. A factory-installed cable rated for 15 m helps maintain signal quality when the control cabinet is mounted away from the motor. The feedback system gives the drive accurate rotor position data during speed changes and load variations, while the closed cooling path removes heat without adding fan-driven airflow around the machine.

The housing carries an ingress protection rating of IP65, helping protect internal windings against dust and water jets near coolant manifolds. Nominal operation occurs at 2000 rpm, which fits many spindle and pump applications that require steady rotational speed. To limit lubricant escape, the output end uses a shaft sealing ring, and insulation class F supports winding temperatures up to 155 °C. The motor is supplied without a holding brake, so any axis that must remain fixed after power removal needs external holding force or drive-applied torque.