MAF180C-0200-FQ-C0-EQ0-35-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911372490
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF180C-0200-FQ-C0-EQ0-35-N1 is a liquid-cooled asynchronous housing motor from the MAF IndraDyn Asynchronous Motors series with a motor frame size of 180 and length code C. It features flange and foot mounting, a protection class of IP65, and operates at a rated speed of 2000 min-1. The motor is equipped with an incremental encoder with 2048 increments and uses a standard bearing type.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF180C-0200-FQ-C0-EQ0-35-N1 is an asynchronous induction motor from the MAF IndraDyn Asynchronous Motors series manufactured by Bosch Rexroth Indramat. Designed as a liquid-cooled housing unit, it is intended to drive machine axes or spindles where continuous torque must be delivered without increasing the frame size. The motor integrates into automation cells through a flange or foot mounting arrangement and accepts a terminal-box power feed positioned on the A-side.
Heat extraction is handled through liquid cooling. Coolant enters and exits through a connection thread sized at 1/2 inch, allowing standard industrial fittings. The windings use insulation class F, so conductor temperature may rise to 155 °C before degradation, supporting dense power loading. Rotor position feedback is produced by an incremental encoder that delivers 2048 increments per revolution and is energized from a 5 V supply, letting common control cards decode speed and angle with low signal noise. Because there is no holding brake, any static load must be secured by external means. Standard rolling bearings support the shaft, and winding code 0200 matches the electrical characteristics expected by the drive parameters.
The housing is sealed to IP65, so dust ingress and water jets do not reach live parts, yet the motor still requires a permissible ambient temperature range of 0–40 °C for continuous duty. Rated speed is 2000 rpm, and vibration class A under DIN EN 60034-14 indicates typical industrial balance quality. The shaft is balanced with a complete key and machined with a keyway, while no shaft sealing ring is provided, so the mounting location should remain free of pressurized fluids. Mounting can be done on a flange face or on feet, and the turnable terminal box simplifies cable routing on the A-side. Final alignment is supported by the 180-frame geometry in length code C, and the absence of a built-in brake reduces axial length while lowering inertial load on connected mechanics.
Frequently Asked Questions about MAF180C-0200-FQ-C0-EQ0-35-N1:
Q: What is the cooling connection type and thread size on the MAF180C-0200-FQ-C0-EQ0-35-N1 motor?
A: This motor uses a 1/2 inch threaded connection for liquid cooling integration.
Q: What type of encoder and resolution are featured on this motor?
A: The MAF180C-0200-FQ-C0-EQ0-35-N1 provides an incremental encoder with 2048 increments and a 5 V supply.
Q: Does the MAF180C-0200-FQ-C0-EQ0-35-N1 come with a holding brake?
A: This model does not include a holding brake.
Q: What is the protection class rating of the MAF180C-0200-FQ-C0-EQ0-35-N1?
A: The motor offers IP65 protection against dust and water ingress.
Q: What is the rated speed of the MAF180C-0200-FQ-C0-EQ0-35-N1 motor?
A: The rated speed for this asynchronous motor is 2000 min-1.
