Product Description:

Bosch Rexroth Indramat manufactures the MAF180C-0150-FQ-S2-GH0-35-V1, a liquid-cooled asynchronous motor in the MAF IndraDyn Asynchronous Motors series. The product serves constant-speed or inverter-fed drive sections where heat must be extracted through the stator jacket rather than released to surrounding air. It uses a 180 mm frame with length code C and accepts both flange and foot mounting, allowing the motor to match existing baseplates or end-shield patterns. A turnable terminal box on the left side simplifies cable entry regardless of cabinet layout, and the plain shaft suits direct-coupled loads that do not require keyed transmission.

The motor reaches a rated speed of 1500 rpm, which aligns with most 4-pole, 50 Hz production lines and enables stable process pacing. Core heat is removed by liquid cooling; the coolant enters through a threaded port sized at 1/2 inch, so standard process fittings can be used without adapters. Position feedback is captured by a single-turn absolute encoder that reports through the EnDat2.1 interface and resolves rotor position into 2048 increments, supporting closed-loop vector control when paired with compatible inverters. The encoder electronics accept a 7–12 V supply, isolating sensitive signals from the power stage. Reinforced bearings counter radial and axial forces produced by belt tension or overhung loads, and the IP-rated housing keeps the stator windings dry when washdown or coolant mist is present.

Thermal insulation class F allows the windings to operate safely at elevated temperatures that may occur during high duty cycles. Acceptable ambient conditions span 0–40 °C, matching typical factory halls without special climate control. Vibration grade A limits displacement to values permitted by DIN EN 60034-14, protecting connected machinery from resonance. The enclosure carries an IP65 rating, so dust ingress and low-pressure water jets will not reach live parts. The motor has no holding brake or shaft sealing ring, which keeps the drivetrain simple, while the turnable power box maintains flexibility for cable rerouting.