Product Description:

Bosch Rexroth Indramat manufactures the MAF180C-0150-FQ-S2-FH0-35-N1 liquid-cooled asynchronous housing motor within the MAF IndraDyn Asynchronous Motors series. The unit fits a 180 frame size with C length code and is intended for inverter-driven machinery that requires constant torque at moderate speed. It provides a sealed motor platform for industrial drives and is commonly used on extruders, presses, and test stands where steady operation and accurate feedback are important. Its layout also suits installations that run for long periods and need dependable thermal control inside enclosed machine areas.

The thermal system relies on liquid cooling routed through 1/2-inch threaded ports, and the connection thread allows direct coupling to a closed-loop chiller without additional adapters. At the rated speed of 1500 rpm, the 0150 winding code and Class F insulation support continuous duty while maintaining insulation performance. The motor has no holding brake and is supplied without a shaft sealing ring, so external holding and sealing must be provided when the application requires them. Position data come from a single-turn absolute encoder with 2048 increments. The feedback signal is transmitted over EnDat2.1 and uses a 7–12 V supply, which supports connection to compatible drive controllers. Standard radial bearings support the rotor, and flange and foot mounting allow either vertical or horizontal installation.

The motor follows DIN EN 60034-14 vibration class A and uses a plain shaft for connection to keyed hubs or shrink disks. Its IP65 enclosure helps protect the housing against dust and water jets in industrial environments. The permissible ambient temperature is 0 to 40 °C, because the motor depends on the external cooling circuit to remove heat during operation. This arrangement is useful in machines where airflow is limited or where heat must be carried away from the motor body rather than released into the surrounding space.