Product Description:

Bosch Rexroth Indramat manufactures the MAF180C-0150-FQ-S2-FG0-35-N1 in the MAF IndraDyn Asynchronous Motors series. This liquid-cooled housing motor is intended for drive lines that need continuous torque at moderate speed, such as extrusion screws, test stands, and large conveyors. It integrates into closed-loop servo systems where a single-turn absolute encoder sends position data to the inverter, allowing the machine controller to regulate shaft speed and direction precisely during automated production cycles.

Liquid cooling is implemented through an internal jacket, and the coolant enters and exits through a connection thread that accepts a 1/2 inch fitting, so installation matches common plant piping. This arrangement stabilizes winding temperature and supports a nominal speed of 1500 rpm during long duty cycles. An integrated encoder communicates over EnDat2.1 and delivers absolute position with 2048 increments per revolution for precise closed-loop control. The housing has an IP65 rating, which helps prevent dust or water jets from reaching active parts. The motor supports flange or foot mounting, and the plain shaft uses a sealing ring to keep lubricant inside and contaminants out. The motor is supplied without a holding brake, so external clamping must secure the load when power is removed.

The motor can operate in ambient air from 0 to 40 °C. Its windings use insulation class F, which allows higher copper temperatures while maintaining dielectric integrity under continuous load. Dynamic balance follows DIN EN 60034-14 and is verified to vibration level A, which helps limit oscillation transmitted to couplings and foundations. The unit also uses standard bearings, frame size 180, length code C, and winding code 0150. It is compatible with drives that support a 7 to 12 V encoder supply.