MAF180C-0150-FQ-S2-EQ0-35-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911334932
The Bosch Rexroth Indramat MAF180C-0150-FQ-S2-EQ0-35-N1 is part of the MAF IndraDyn Asynchronous Motors series. This liquid-cooled asynchronous motor features flange and foot mounting, a frame size of 180, and has a rated speed of 1500 min-1. It is equipped with a single-turn absolute encoder with 2048 increments and uses an IP65 protection class.
Internal Product Review
The MAF180C-0150-FQ-S2-EQ0-35-N1 is a liquid-cooled asynchronous motor with IP65 protection. The EnDat2.1 single-turn absolute encoder gives this motor precise feedback and strong drive compatibility. Flange and foot mounting, along with a turnable terminal box, makes this unit a very capable choice for streamlined machine integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF180C-0150-FQ-S2-EQ0-35-N1 motor is produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. This liquid-cooled asynchronous motor provides continuous rotary motion for industrial automation where compact size and controlled heat removal are important. It couples to driven equipment through a keyed shaft and can be mounted by flange or foot, giving flexible installation options on presses, conveyors, or forming lines that run for long shifts. Its design is suited to applications where enclosed layouts or high duty cycles make airflow-based cooling less practical.
Continuous operation is specified at 1500 rpm, a speed that aligns with 50 Hz operation while preserving torque margin. Thermal energy is removed by liquid cooling, and the jacket carries a 1/2 inch connection thread so closed-loop coolant circuits can be attached directly. Position feedback is supplied by a single-turn absolute encoder with EnDat 2.1 communication, delivering 2048 increments per revolution for stable speed regulation and accurate position tracking. Because the motor is supplied without a holding brake, applications that require standstill retention must use external clamping or sustained motor torque.
The encoder electronics accept 7–12 V, allowing the feedback channel to operate from the same low-voltage supply used by nearby sensors and control devices. A housing rating of IP65 helps block dust ingress and resists low-pressure water jets, while the insulation system is class F for winding temperatures up to 155 °C. Mechanical vibration complies with DIN EN 60034-14, and the rotor is balanced with a complete key so couplings can be fitted without added trim balancing. The motor also uses standard bearings, a keyed shaft without a sealing ring, and a terminal box on side A that can be turned to improve cable routing. Frame size 180 with length code C identifies the stator stack, the winding code 0150 indicates the conductor arrangement, and the motor operates in ambient temperatures from 0 °C to 40 °C.
