Product Description:

The MAF180C-0150-FQ-S2-EK0-35-N1 belongs to the MAF IndraDyn Asynchronous Motors series produced by Bosch Rexroth Indramat. It is a liquid-cooled asynchronous housing motor intended for production machinery that runs continuously under constant torque demands, including extrusion screws, test stands, and large conveyor sections. By combining a closed cooling circuit with an asynchronous rotor, the unit maintains thermal stability while delivering steady mechanical output in industrial automation cells. This layout supports continuous-duty operation where stable temperature control is important for consistent motor performance.

The motor reaches a rated speed of 1500 rpm when the stator winding operates at nominal current. Heat is removed through liquid cooling using a 1/2-inch connection thread, so the cooling circuit can be connected directly to plant chillers. A single-turn absolute encoder provides position data at 2048 increments and operates from a 7–12 V supply, which supports closed-loop speed control. The motor is sealed to IP65, and its electrical insulation meets class F for winding temperatures up to 155 °C. A standard bearing arrangement, a shaft sealing ring, and a keyway shaft support direct coupling to driven equipment, while power cabling enters on the A-side through a turnable terminal box. The motor has no holding brake, so load holding must be provided externally when the axis is stopped.

The rotor is balanced with half key to minimize residual vibration at startup. The housing supports flange and foot mounting, so it can be secured without additional adapter plates. Feedback is carried over an EnDat2.1 interface for digital diagnostics and position transmission. The permissible ambient temperature range is 0–40 °C. Frame size 180, length code C, and winding code 0150 correspond to this motor configuration, and vibration grade A follows DIN EN 60034-14.