Product Description:

The MAF180C-0150-FQ-S2-DH0-35-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It is built for industrial equipment that requires regulated torque and speed, including pumps, extruders, and gearbox-driven machinery. The motor uses a frame size 180 housing with flange and foot mounting, so it can be secured in different machine layouts without changing the basic drive concept. Its plain shaft provides a direct mechanical output for coupled loads, while the internal coolant circuit supports continuous-duty operation.

At a rated speed of 1500 rpm, the motor delivers steady output while staying within vibration level A, which helps limit unwanted motion in connected equipment. Heat is removed by liquid cooling, allowing the stator to stay within the thermal range of its insulation system during sustained operation. The enclosure is rated IP65, which helps protect internal parts from dust and water jets in demanding production areas. Rotor position is reported by a single-turn absolute encoder with 2048 increments, giving the drive accurate position data for control tasks. Power conductors terminate in a turnable terminal box, so the cable outlet direction can be adjusted to suit the available space.

The encoder communicates through the EnDat 2.1 interface and operates from a 7 to 12 V supply, which supports direct integration with compatible drive electronics. A coolant inlet thread of 1/2 inch fits common fittings used in closed-loop cooling circuits. Permissible ambient air is 0 to 40 °C, and the overall insulation class is F. The motor is supplied without a holding brake, uses standard rolling bearings, and has frame length code C. Winding code 0150 identifies the electrical design, and the lack of a shaft sealing ring means external protection is needed where contaminants may reach the shaft area.