Product Description:

Bosch Rexroth Indramat's MAF180C-0150-FQ-M2-EP2-35-V1 belongs to the MAF IndraDyn Asynchronous Motors series. The motor is a liquid-cooled, cage-rotor unit intended for continuous-duty drive axes where heat is removed through the housing rather than through surrounding air. Its 180 frame with length C allows direct integration on machine beds by either flange or foot mounting, and the A-side terminal box supports orderly power routing along a common cable tray in multi-motor production lines.

The housing supports Liquid cooling through a dedicated circuit that uses a 1/2-inch process port. The 1/2 inch thread matches standard plant plumbing and provides a straightforward connection point for the cooling circuit. Rotor position is monitored through an EnDat2.1 serial interface that carries power and data for the mounted multi-turn absolute sensor, which resolves motion to 2048 increments per revolution and operates from a 7–12 V supply. With reinforced bearings and a shaft balanced with a complete key, the drive can run steadily at a rated speed of 1500 rpm without exceeding permissible bearing loads. A rotatable terminal box allows the three-phase leads to be positioned after the final machine layout, and the shaft sealing ring helps keep coolant mist away from the bearing seats.

The cast-iron enclosure is rated IP65, so dust is kept out and water jets do not affect live parts during washdown. The motor maintains its thermal limits within an ambient range of 0–40 °C, aided by class F insulation that tolerates winding temperatures up to 155 °C. Compliance with DIN EN 60034-14 confirms vibration level A operation, which helps reduce stress on couplings and foundation plates during continuous use. The motor also uses flange and foot mounting, reinforced bearings, and a keyed shaft with a sealing ring for extruders, test stands, and high-duty conveying zones.