Product Description:

Bosch Rexroth Indramat builds the MAF180C-0150-FQ-M2-DK0-35-A1 for the MAF IndraDyn Asynchronous Motors series. This liquid-cooled asynchronous motor is intended for drive axes that require continuous torque delivery in compact spaces. With a 180 frame size and C length code, the unit fits gantry, mill, and test-stand installations where footprint and thermal management are both important. In industrial automation lines, the motor serves as a direct-coupled prime mover that converts variable-frequency inverter power into controlled rotary motion without additional gear reduction. Its housing layout supports applications that need steady thermal performance during long-duty operation.

At a rated speed of 1500 rpm, the rotor can deliver full output while staying within the F-class insulation temperature limit. The housing has an IP65 protection class, so dust and low-pressure water spray do not reach the windings. The motor uses liquid cooling to circulate fluid through the jacket and keep the stator within its thermal limit. Rotor position is reported by a multi-turn absolute encoder with 2048 increments per revolution, and the encoder operates from a supply of 7–12 V. Feedback data travel over EnDat 2.1 for digital communication with the drive. The motor also meets vibration level A under DIN EN 60034-14, uses an A-side fixed bearing to locate the shaft, and comes without a holding brake.

Coolant enters the jacket through a 1/2-inch connection thread, and the turnable terminal box on the right side keeps power wiring clear of the coolant hoses. The right-side terminal box also helps separate power leads from the cooling connections in tight machine layouts. The rotor is balanced with a half key, and the keyway shaft uses a shaft sealing ring to support sealed operation at the output. The permissible ambient temperature range is 0 to 40 °C. The motor also uses flange and foot mounting, which allows straightforward installation on machine bases or coupled equipment.