Product Description:

The MAF180C-0100-FQ-S2-FH0-35-N1 asynchronous motor is produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. This liquid-cooled housing motor serves as the prime mover for heavy-duty automation such as extruders, presses, and test stands, where constant torque and thermal stability are critical. When paired with vector inverters, the unit converts electrical power into regulated shaft rotation for closed-loop speed and position control in industrial production lines. Its design is suited to applications that operate under sustained load and require stable output during changing process demand.

Thermal management relies on liquid cooling circulated through a 1/2 inch connection thread, which removes stator heat without increasing the 180 mm frame size. At the rated point, the rotor turns at 1000 rpm, delivering steady torque while keeping vibration within level A in accordance with DIN EN 60034-14 balance limits. The enclosure is rated IP65, so dust and water jets cannot reach the windings. Mechanical installation uses flange and foot mounting, and the plain shaft is supplied without a shaft sealing ring. Standard bearings support radial loads common in belt-drive applications, and frame length code C corresponds to the stator stack used for this housing size.

Position feedback is provided through an EnDat 2.1 interface with a single-turn absolute encoder that has 2048 increments of resolution and operates from a 7 to 12 V supply. The motor is supplied without a holding brake, so stopping or holding force must be provided by the drive or external machine hardware when required. Class F insulation permits conductor temperature rise suited to inverter duty, and the allowable ambient range of 0–40 °C helps maintain predictable thermal behavior around the machine. Winding code 0100 matches the electrical characteristics expected by compatible IndraDrive controllers.