MAF180C-0100-FQ-S2-DH0-35-N3
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911328360
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAF180C-0100-FQ-S2-DH0-35-N3 Induction Motor is manufactured by Bosch Rexroth Indramat. This motor has a Singleturn absolute encoder , EnDat2.1, with 2048 encoder and a Standard bearing. It also has a Smooth shaft, without Shaft Seal Ring shaft and is not equipped with a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF motor product line features some of the most massive and powerful asynchronous motors designed by Rexroth Bosch. Intended to drive the heaviest loads, MAF motors usually have high torque capabilities and rated power. The MAF180C-0100-FQ-S2-DH0-35-N3 is a MAF motor manufactured by Rexroth Indramat, having a winding of 0100 and a frame class of 180C. MAF180C motors weigh 322 kilograms and span a length of 0.792 meters without a blocking brake. At its rated speed of 1000 rev/min, the machine outputs a power of 41.9 kW. At this same operating point, the corresponding root-mean-square current is 93.5 A, while the shaft torque approaches 400 Nm.
During stall operation, when the motor draws power from a supply while keeping its rotor stationary, the machine exhibits corresponding torque and current values, which influence the design of the protection system. For the MAF180C-0100-FQ-S2-DH0-35-N3, the stall torque and current are 435 Nm and 97.6 A, respectively. Compared with the rated values, the stall parameters are slightly larger in magnitude. At room temperature, the MAF180C-0100-FQ-S2-DH0-35-N3's output torque increases by 5.04 Nm for every ampere increase in the input. At 44% duty cycle, the MAF180C-0100-FQ-S2-DH0-35-N3 can run continuously for 5 minutes.
The MAF180C-0100-FQ-S2-DH0-35-N3 has a single-turn encoder that monitors the relative position of the rotor with respect to a reference or starting point. The single-turn encoder uses 2048 increments and can only monitor the relative displacement of the rotor in one complete revolution. Single-turn absolute encoders cannot track how many revolutions the rotor has undergone after operating for some time. The MAF180C-0100-FQ-S2-DH0-35-N3 employs FQ cooling, representing an efficient liquid cooling system with a built-in 1/4" coolant thread. To avail this product with a special warranty, order now at Wake Industrial's official sales page.
