Product Description:

The MAF180C-0100-FQ-M2-HH0-35-V1 is an asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Classified as a drive element for continuous-duty industrial machinery, it converts inverter-supplied three-phase power into controllable torque for conveyors, presses, or spindle assemblies. The housing includes closed coolant passages so the motor can sustain nominal output without relying on ambient airflow, which supports use in tight enclosures or clean-room installations.

The motor reaches a rated speed of 1000 rpm and maintains that speed under load through an internal circuit for liquid cooling that uses a 1/2-inch connection thread. The turnable terminal box on the B-side simplifies cable entry regardless of installation angle, while flange and foot mounting holes follow DIN EN 60034-14 and are suitable for vibration level A. Position feedback is delivered by a multi-turn absolute encoder that communicates over the EnDat 2.1 interface; the sensor divides one revolution into 2048 increments and operates from a 7–12 V supply. With an enclosure rated IP65, the stator windings remain protected from dust and water jets during routine washdown cleaning.

Its reinforced bearings absorb higher radial and axial forces when belt drives or couplings impose side loads. Because the unit is supplied without a holding brake and without a shaft sealing ring, static holding and environmental sealing must be handled at the machine level. Windings built to insulation class F tolerate elevated internal temperatures, and reliable performance is specified between 0–40 °C. Frame size 180 with length code C sets the stack height, while winding code 0100 identifies the resistance and leakage inductance used by the matched drive. A plain shaft completes the mechanical interface and allows direct coupling with keyed hubs or shrink discs.