Product Description:

The MAF160C-0200-FR-S6-FP1-05-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As a flange-mounted unit for drive axes that demand continuous duty under tight thermal limits, it converts electrical energy into controlled mechanical rotation for industrial automation cells, conveyor modules, and processing lines. Its enclosed motor design supports stable operation in equipment where sustained output and predictable thermal behavior are important.

The motor operates at a rated speed of 2000 rpm, and heat is removed by liquid circulating through an enclosed rapid-action coupling with a 1/2 inch connector. This active cooling keeps the F-class windings within thermal limits while preserving the IP65 housing. Position data are supplied by a single-turn absolute encoder for Ex-type machines. It provides 2048 increments of resolution, communicates over EnDat 2.1, and is factory cabled for 15 m, allowing cabinet placement away from vibration sources. The encoder electronics operate from 7-12 V, permitting direct supply from common drive controllers. Shaft balance is achieved with a complete key, and a shaft sealing ring works with the balanced rotor to limit the entry of airborne contaminants.

An electrically released holding brake supplies 100 Nm of static torque, keeping suspended loads secure when the drive is de-energized. The motor frame uses size 160 with length code C and is built in accordance with DIN EN 60034-14, which supports controlled shaft runout during precision assembly. Its insulation system withstands repetitive thermal cycles in ambient conditions from 0 to 40 °C without derating, and the internal winding code 0200 matches the designated drive data set. Flange mounting supports direct installation on gearboxes, while standard bearings and vibration severity level A support reliable operation during start-stop duty.