Product Description:

Bosch Rexroth Indramat’s MAF160C-0200-FR-S2-HH0-35-N1 is a liquid-cooled asynchronous housing motor from the MAF IndraDyn Asynchronous Motors series. The motor has a 160 frame size and frame length C, and it is built to DIN EN 60034-14 vibration requirements. Used as a drive element in industrial automation, it converts electrical power into controlled mechanical rotation for conveyors, extruders, and similar machinery. The motor is supplied without a holding brake, so applications that require static holding torque must rely on the drive or an external clamping device.

Heat is removed by liquid cooling that circulates through an enclosed rapid-action coupling sized at 1/2 inch, which simplifies hose changes and supports stable thermal operation. The cooling circuit helps keep stator temperature within the insulation limit, while a standard bearing arrangement supports the plain shaft and flange and foot mounting holes allow the 160-frame housing to attach to rigid bases. Feedback is provided by a single-turn absolute encoder that communicates through EnDat2.1; its disc produces 2048 increments per revolution, and the electronics operate on a 7 to 12 V supply. Electrical endurance is supported by insulation class F, and the sealed housing is rated IP65 to block dust and water jets. The power terminals are located on the B-side, and the absence of a shaft sealing ring reduces friction when the shaft is coupled to external gear sets.

The swivel-cap feed-through allows the cable gland in the turnable terminal box to face upward, downward, or sideways, which helps provide clearance around nearby components. The stator winding identified by code 0200 pairs with the C-length frame to deliver a rated speed of 2000 rpm without excessive vibration, and the design complies with vibration level A. Continuous duty is supported in ambient conditions from 0 to 40 °C, so the liquid-cooled stator and standard bearings remain within their normal thermal range during prolonged operation.