Product Description:

The MAF160C-0200-FQ-S6-KG0-35-N1 asynchronous motor is produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled housing motor, it converts electrical input into continuous rotary motion for conveyor sections, extruders, and other driven equipment in automated lines. The unit combines a 160 frame with a C length code, and the flange-and-foot mounting arrangement allows straightforward integration into existing machine frames while maintaining stable alignment.

Its mechanical output is based on a rated speed of 2000 rpm. Heat generated during operation is removed through liquid cooling, and the coolant enters the stator jacket through a 1/2-inch connection thread that matches standard piping. Rotor stability is supported by a standard rolling-element bearing set, while position feedback is supplied by a single-turn absolute encoder for Ex-type motors that communicates through the EnDat2.1 serial interface with 2048 increments of resolution for accurate speed regulation at low frequencies.

The encoder operates from 7 to 12 V and reaches the drive through a 15 m preassembled cable, which helps simplify cabinet layout in large installations. The motor carries IP65 enclosure protection, and a shaft sealing ring guards the plain output shaft against coolant ingress. Operation is permitted from 0 to 40 °C, matching insulation class F thermal limits and vibration grade A under DIN EN 60034-14. Because the unit is supplied without a holding brake, external mechanical restraint is required when static torque must be maintained. All electrical parameters conform to winding code 0200 and to the general requirements of the same standard.