Product Description:

The MAF160C-0200-FQ-S2-KH0-35-N1 is an asynchronous motor from the MAF IndraDyn Asynchronous Motors series manufactured by Bosch Rexroth Indramat. It drives machine axes where a continuously rotating element couples directly to gearboxes, spindles, or pumps in automated production cells. The design uses a 160 frame size with the C length code, giving a compact yet high-torque form factor. Installation is simplified by flange and foot mounting points, while a plain shaft provides direct coupling to the load. Standard rolling bearings support the rotor, and vibration level A promotes smooth running. This layout suits machines that need steady rotation without a separate transmission stage.

This motor is an asynchronous housing motor, and heat is removed through liquid cooling circulated via a connection thread built into the stator jacket. The hydraulic port uses a 1/2 inch thread, so standard plant plumbing attaches without adapters. Position feedback is supplied by a single-turn absolute encoder that communicates over EnDat2.1. Within each revolution, the disk divides motion into 2048 increments, and the sensing electronics are energized by 7–12 V from the controller. This feedback arrangement allows the connected drive to monitor rotor position during speed control and startup. The shaft end is supplied without a shaft sealing ring, and the motor has no holding brake, so external mechanisms must secure vertical axes. The windings use insulation class F, and winding code 0200 marks the electrical design.

Rated operation reaches 2000 rpm, enabling direct connection to moderate-speed spindles or conveyor rollers. The housing has an IP65 rating, shielding the stator from dust and low-pressure water jets. Continuous service is permitted in ambient air from 0 to 40 °C, and mechanical vibration limits follow DIN EN 60034-14.